PowerStone Plus - Waterborne Acrylic Masonry Sealer (Five Gallon): 5489

(No reviews yet) Write a Review
SKU:
5489
Weight:
50.00 LBS
  • PowerStone Plus - Waterborne Acrylic Masonry Sealer (Five Gallon): 5489
  • PowerStone Plus - Waterborne Acrylic Masonry Sealer (Five Gallon): 5489
  • PowerStone Plus - Waterborne Acrylic Masonry Sealer (Five Gallon): 5489
  • PowerStone Plus - Waterborne Acrylic Masonry Sealer (Five Gallon): 5489
$333.41

Description

  • Multipurpose Primer That Protects a Large Variety of Surfaces!
  • PowerStone Plus can be applied to both horizontal and vertical surfaces and is ideal for use on concrete, plaster, brick, slate, and stucco
  • PowerStone Plus is a clear multipurpose waterborne acrylic primer that provides protection to a large variety of surfaces 
  • This highly alkali resistant weatherproof coating resists household cleaners, gasoline, oil, weathering and efflorescence
  • PowerStone Plus seals brick, block and poured concrete to reduce water penetration and prevent surface dusting and staining
  • PowerStone Plus can be applied to both horizontal and vertical surfaces and is ideal for use on concrete, plaster, brick, slate, and stucco
  • Clean metal surfaces of copper and aluminum can be finished with PowerStone Plus to prevent surface oxidation
  • A topcoat is recommended for exterior use 
  • Please call for freight
      Specifications
      Brief Description PowerStone Plus Waterborne Acrylic Masonry Sealer (Five Gallon): 5489
      Part Number 5489
      Weight 50.0000
      Brand Name Fiberlock Technologies Inc
      Min. Selling Qty 1
      Std. Pkg. UOM Each
      Std. Pkg. Qty 1
      Package 1EA
      Capacity 5.0 gal
      Solids by Weight ± 2% 36.0%
      Solids by Volume ± 2% 29.0%
      Viscosity at 70° F 95-120 Kreb Units
      Specular Gloss 80° ± 5 @60°
      Flash Point Non-combustible
      Shelf Life 36 Months Min. (Original Sealed Container)
      Calculated VOC 90 Grams/liter
      Smooth Surface Coverage 250-300 ft2/gal
      Porous Surface Coverage 200-250 ft2/gal
      Drying Time @ 70-77° F 50% R.H To Touch: 1 hour To Recoat: 2 Hours
      Min. Application Temp. 50° F
View AllClose